Generator Power Services Help Keep Your Unit Prepared for Short Notice Operation

Generator power services such as preventive maintenance are essential to the performance of your backup system. A generator is a building appliance used to obtain continuous power at times when the main source becomes unavailable. This equipment is necessary for preventing the disruption of critical processes and protecting certain devices used within your building. A generator is a mechanical device designed to convert energy from diesel or another fuel source into electrical power that is dispersed to designated output sources throughout your building. A unit does not physically create the energy, but instead transfers electric charges by means of forcing it through several mechanical components to a designated circuit or set of circuits. The supplied flow generates the current necessary to support the voltage requirements of items used in your building. Generator services in Georgia offer the right unit component care for gaining dependable performance.

What Portions of a System Receive Generator Service by Georgia Professionals?

A system has the same basic parts; however, additional components could be present, depending on the design. These main portions are typically inspected by a generator service in Georgia:

  • Engine Fuel
  • Arrangement Alternator
  • Cooling System
  • Exhaust System
  • Voltage Regulator
  • Lubrication Arrangement
  • Control Panel
  • Battery
  • Main Assembly

The engine functions as the mechanical energy input source and size is determined based on the maximum load capacity of the unit. In an overhead design, you will find the intake and exhaust component valves at the engine’s cylinder head. The valves on non-overhead designs are located on the actual engine block. Overhead versions supply a more compact design, an easier to use operation mechanism, improved durability, less noise, and reduced emission levels. Generator power services can be obtained for an evaluation of this or other portions of your unit.

The alternator or “genhead” transforms the engines supplied input into electrical energy. This generation can occur by induction, permanent magnets, or the inclusion of an exciter. Induction is the most common method found in large commercial generators. The stator is a still part consisting of electrical conductors and coils surrounding a core made of iron. A rotor is used to deliver the magnetic field needed by the stator to generate electrical current. Housings can be plastic or metal, with the latter providing increased durability. Georgia Generator service professionals can assist with determining the most optimal care practices for these components.

The fuel tank uses a series of pipes, a pump, filter, and injector to supply the mechanical input needed for this conversion process. The regulator guarantees proper output voltage, while the battery provides the initial charge necessary to start the generator. Lubrication is supplied by means of a pump to make certain parts do not overheat while the unit is running. The control panel contains the gauges, switches, and controls to manage system processes. Every part is equally important to the operation of your backup source and must be maintained appropriately to ensure reliability. Generator power services can be obtained to prevent part wear or additional complications from causing a malfunction. Prime Power certified technicians can evaluate your equipment and set up a schedule that will provide long term, dependable operation.